Cara Setting WiFi Extender TP Link Dengan Mudah
78 / 100

How to Easily Set TP Link WiFi Extender

How to Easily Set TP Link WiFi Extender, WiFi Extender TP Link – If you have a large home or office, or are trying to expand your Indihome Internet connection to additional rooms such as warehouses, garage, or terrace area, then network WiFi Extender may be the product you need.

Advertisements

Weak WiFi can be very frustrating, and that's why it varies. You may have a router that doesn't throw with enough force to reach all the nooks and crannies of your home, or maybe there is a bottleneck in terms of signal. Barriers in general are things like thick walls or floors, but other household electronics can and do cause signal problems or signal interference.

Read more articles about network computer

TP-Link is a networking company that makes a wide range of networking products, from wifi router home to wifi range extenders to modems and switches. For this article, we will focus on the wifi extender that is the signal range. Wifi range extenders are generally cheap and work well, but home networking can be black art. In this article, I will discuss how the extender wifi range works, why you might need one (or more), and how to set up your TP-Link wifi extender model.

HOW WiFi RANGE EXTENDERS WORK

WiFi network extender works by receiving and retransmitting WiFi signals from your wifi router so that new coverage areas are opened. There are two basic types of wifi extenders: Antenna based wifi extenders basically just add another broadcast node to your network, while powerline-based extensor wifi uses your home electrical system as a wired network to transmit Internet signals.

For example, Let's take a look at this typical house plan. The router is located in the living room, and areas with strong signal, good signal, weak signal, and no signal is shown on the package.(Note that this is a simple example; in real life a house of this size will be served by a single router, but I don't want to fill your screen with floor plans of big houses.)

Cara Setting WiFi Extender TP Link Dengan Mudah

In this example, there is a good signal in most houses, but in the bedroom on the left side of the package, there is only a weak signal or no signal at all. This problem can be solved by moving the router to a more central location, but it may be inconvenient or impossible. However, You can place a wifi extender in the hallway that leads from the living room to the bedroom. That will change the signal map to something like this:

Cara Setting WiFi Extender TP Link Dengan Mudah

Wifi extender FEATURES AND OPTIONS

Wifi extender FEATURES AND OPTIONS TP-Link's wifi extenders come in a variety of configurations and speeds. Note that no matter how fast or strong your wifi extender is, it can't beat connectivity your basic internet. It means, if you have an extender that can handle the speed 800 MBps but your own Internet service only delivers 100 MBps, then your home WiFi network will run on 100 MBps, no more than that. So no need to buy a wifi extender that provides more bandwidth than what you currently have.

One nice feature to have in a wifi extender is the built-in wired Ethernet port. This means that in the physical location of the wifi extender, You can connect wired Internet to nearby devices. This can be especially useful if you have a desktop computer or game console that requires a physical connection instead of WiFi.

Another useful feature found on many TP-Link devices is the beamformer, which is a physically configurable antenna that you can point towards the device that will use the wifi extender to connect. This can increase the range somewhat and can dramatically improve Internet performance on the device, albeit at a somewhat reduced cost effectiveness of the wifi extender in areas not being beamformed. Beamform-equipped wifi extenders often have multiple beamformers, However..

Another nice feature is the ability to use the wifi range extender as an access point. Many TP-Link wifi extenders have this feature. Basically this means that instead of extending the range of your existing wireless network, You can plug the wifi range extender into networkcable which exists and it will become a WiFi hotspot for nearby devices.

This is very useful for business especially, which often have extensive cable networks already in place (usually at a great cost) years ago – now wired networks can become the backbone of wireless systems without having to put wifi extenders everywhere in the building – only in places where WiFi coverage is needed.

Regardless of the features and options you choose, You must connect and configure your TP-Link wifi extender for it to work. In the next section I will talk about how to set up a TP-Link wifi extender.

(Still need to buy a TP-Link WiFi extender ? Here is the link totheir product catalog on Bukalapak .)

Cara Setting WiFi Extender TP Link Dengan Mudah
Credits: technologies

Cara Setting Wifi Extender TP Link

Before doing anything with the TP Link wifi extender, You need to collect some information about router which exists. You need to identify the router's IP address, WiFi SSID (nama broadcast), the type of encryption used and the password to access the network.

  1. Log in to your router. This is usually achieved by typing its IP address into the browser. Most often it 192.168.1.1, but it could be something else. Refer to your router's manual.
  2. Access the wifi section of your router's GUI and write down the details above: router IP address, SSID, encryption method, and password to access the network.
  3. Stay logged in to the router for now.

If your router is not responding to 192.168.1.1, may have a different IP address. Wifi router Fiber Home Indihome uses the 192.168.XXX range. If yours is the same, try this:

Cara Setting WiFi Extender TP Link Dengan Mudah
Credits: technologies
  1. Right-click on the Windows Taskbar and select Task Manager.
  2. Select File, New Task and check the Run as Admin checkbox.
  3. Type CMD into the box to open the command line box.
  4. Type 'ipconfig / all ’into the CMD box and press Enter.
  5. Look for Default Gateways. This is the IP address of your router.

PREPARING YOUR TP LINK Wifi extender

To get started, we need to connect the TP Link Wifi extender to your computer with an Ethernet cable. This is so you can program the wifi settings into it so it can connect.

  1. Plug your TP Link wifi extender into a wall outlet.
  2. Connect to your computer with an Ethernet cable.
  3. Open the browser on your computer and navigate tohttp://tplinkrepeater.net . If that doesn't work, tryhttp://192.168.0.254 . You will see the TP-Link web page appear.
  4. Choose Quick Settings and Next.
  5. Select your region and next.
  6. Let the TP-Link extender scanner scan for wifi networks. It may take a minute or two depending on how many networks there are around you.
  7. Choose your wifi network from the list, and select next.
  8. Enter the wifi password when prompted.
  9. Select 'Copy from main router' if you want a larger wifi network or 'Customize' if you want to create a different network.
  10. Select next.
  11. Review the network settings in the last window and select Done if everything is correct.

The TP Link wifi extender will reboot and hopefully will allow access to the internet. Test first with an Ethernet cable, and then without using wifi. Depends on the model of TP Link wifi extender you are using, there may be a light on the front indicating whether it is connected to the network or not. Monitor this to make sure it can maintain the connection.

Cara Setting WiFi Extender TP Link Dengan Mudah
Credits: Bukalapak

TP LINK WIFI EXTENDER CONFIGURATION WITH WPS BUTTON

If your router has a WPS button, You can use it to organize everything too. WPS is a WiFi Protected Setup that allows you to configure your network automatically and securely. The button is a physical button, usually found on the back of the router, and usually labeled WPS.

Some TP Link WiFi extenders also have a WPS button so you can use this to set it up.

  1. Connect the TP Link wifi extender to an outlet close to your wifi router.
  2. Press the WPS button on the back of the router. You will see the WPS LED blink. If not, press again.
  3. Press the WPS button on the TP Link wifi extender. The WPS light will also flash here. Press again if not.

Using WPS means you don't have to manually configure settings on your TP Link wifi extender. By physically pressing the WPS . button, You tell the router that you allow it to connect with devices that also have WiFi Protected Setup enabled. There is a window, limited to two minutes, where the router will accept connections to add a bit of security.

WPS can be a bit of a hit and miss, which is why I don't recommend using this method in the first place. If you don't get a wifi network, reset both devices and try again. If that doesn't work, configure manually as above.

After you follow the basic procedure to set up your TP Link wifi extender, You should enjoy fast connection from every corner of the house. If you don't get the desired result, experiment with placing the extender in different locations until you find the one that gives the best results.

Advertisements

source : https://www.teknoiot.com/cara-setting-wifi-extender-tp-link/

Advertisements

 1,784 total views,  6 views today

By admin

Writer

Leave a Reply

Your email address will not be published. Required fields are marked *